Home / Product / Kitchen Equipment / Fryer

Commercial Deep Fryer Manufacturer – Electric & Gas Fryers

VOCOOK supplies commercial electric and gas fryers for distributors, importers and restaurant operators. If you are looking for a commercial deep fryer manufacturer, our fryer range includes single- and double-tank models with different basket arrangements, alongside countertop and selected floor-standing designs.

Part of our commercial kitchen equipment range, these fryers provide options for restaurant frying stations, takeaway kitchens and fried-food counters. Model selection depends on the menu, batch quantities, oil separation needs and available utilities.

Commercial Fryers for Restaurants, Takeaway Kitchens & Food Counters

Select a fryer configuration according to the menu, batch schedule and available energy supply. Single-tank models can serve focused frying tasks, while double-tank models allow separate oil use for different products.

Configuration Representative Models Recommended Applications
Single-Tank, Single-Basket Electric Fryers HEF-81, HEF-88, HEF-81A Small takeaway outlets, café snack stations and restaurant side-dish preparation
Single-Tank, Double-Basket Electric Fryers¹ HEF-83, HEF-83A Restaurant frying stations and takeaway counters handling separately loaded batches
Double-Tank, Double-Basket Electric Fryers HEF-89, HEF-11L-2, HEF-12L-2 Mixed-menu takeaway kitchens and fried-food counters requiring separate oil tanks
Single-Tank Gas Fryers HGF-71, HGF-971 Snack shops and restaurant frying stations with a compatible gas supply
Double-Tank Gas Fryers HGF-72, HGF-972 Gas-equipped takeaway kitchens and restaurant frying areas handling different food categories

Small Takeaway Outlets and Café Snack Stations

For a focused menu or occasional side-dish preparation, single-tank, single-basket electric fryers provide a configuration to consider. Match basket dimensions and working oil capacity to the intended food, then check equipment dimensions against the available counter space.

Restaurant Frying Stations

Double-basket configurations allow separate loading and unloading of batches during service. Confirm the actual tank arrangement before selection: two baskets do not necessarily provide separate oil compartments or independent temperature settings.

Mixed-Menu Takeaway Kitchens and Fried-Food Counters

Double-tank fryers can support separate oil use for items such as fries, chicken and fish. Allocate each tank according to the menu and peak-period demand, and confirm whether the selected model provides independent temperature controls.

Kitchens with an Existing Gas Supply

Single- and double-tank gas fryers provide options for gas-equipped foodservice operations. Select the tank arrangement according to the menu, then confirm gas type, supply pressure, connections and installation requirements.

Application suitability depends on food size, batch weight, frying time and available utilities. Confirm model-specific specifications before ordering.

Commercial Fryer Specifications

VOCOOK’s fryer range includes conventional electric fryers, floor-standing and digital-control models, E-series fryers, gas fryers and pressure fryers. The overview below summarizes published capacities and equipment dimensions for initial comparison.

Product Type

Listed Capacity

Overall Dimensions Range (mm)

Configuration Notes

Conventional Electric Fryers

Single-tank: approx. 4–21L; twin-tank options from 4L×2 to 21L×2

275–850 × 380–615 × 295–650

Different tank and basket arrangements

Floor-Standing & Digital-Control Electric Fryers

Approx. 16–30L; twin-tank options from 16L×2 to 30L×2

340–850 × 470–900 × 940–1140

Single- and twin-tank options; selected dimensions require confirmation

E-Series Electric Fryers

6L, 6L×2, 6L×3

280–850 × 450–550 × 280–300

Single-, twin- and triple-tank models; E12L tank arrangement requires confirmation

Gas Fryers

Single-tank: approx. 6–18L; twin-tank options from 6L×2 to 21L×2

290–850 × 470–650 × 460–1070

Gas type, supply pressure and connections confirmed by model

Electric Pressure Fryers

16L

350–450 × 400–570 × 500–520

MDXZ-16 and MDXZ-16A

Gas Pressure Fryer

25L

470 × 1030 × 1180

MDXZ-25D; electrical supply also required according to published specifications

Electrical Requirements for Electric Fryers

Before selecting an electric fryer, confirm the electrical supply at the installation site. Submit the following information with the enquiry:

  • Destination country and voltage: Identify the intended market and available supply voltage.
  • Frequency and phase: Specify the supply frequency and whether single-phase or three-phase power is available.
  • Plug or wiring requirements: Provide the required plug standard or fixed-wiring arrangement.
  • Available electrical capacity: Check the selected model’s rated power and current against the installation’s supply capacity.

Available electrical configurations depend on the model and must be confirmed before ordering.

Gas Requirements for Gas Fryers

For gas fryer enquiries, specify the destination country, intended gas type—natural gas (NG) or liquefied petroleum gas (LPG)—and available supply pressure. Confirm the selected model’s gas connection size and regulator requirements.

Do not assume that natural gas and LPG configurations are interchangeable. The required gas configuration must be confirmed for the equipment being ordered.

OEM/ODM Options for Commercial Fryers

VOCOOK supports OEM/ODM project enquiries for its fryer range. Branding, packaging and specification changes are reviewed according to the selected model, order quantity and engineering requirements.

Customization Area

Requirements for Review

Electrical Configuration

Voltage, frequency, phase, rated power and plug or wiring requirements

Gas Configuration

NG or LPG, inlet pressure and connection requirements

Panel and Branding

Logo, panel language, operating labels and nameplate artwork

Materials and Structure

Requested materials, thickness, equipment dimensions and tank requirements for specified components

Packaging

Branded cartons, barcodes, shipping marks and protective packaging requirements

 

Customization availability and any additional testing or documentation requirements are confirmed during project review.

Manufacturing and Quality Control

Quality checks cover sheet-metal processing, sample testing before mass production, testing before packing and random warehouse inspections. These steps support specification checks throughout production and before shipment.

Further information is available on our OEM/ODM and after-sales services page.

Ordering and After-Sales Support

Item

Information

Quotation Requirements

Model numbers, quantities, destination market and required configurations

Production Lead Time

Normally 20–30 days, depending on models and quantities; customization requirements are confirmed separately

Transportation

Shipping method and estimated transit time are confirmed separately from production lead time

Warranty

One-year warranty; coverage and service arrangements follow the agreed order terms

Technical Support

Technical video support

Product Documentation

Confirm available specifications, certificates and reports for the selected model and destination market

Frequently Asked Questions

What is the minimum order quantity for commercial fryers?

The minimum order quantity is 5 units. Please provide the selected models and any customization requirements to confirm the quotation and order details.

Can I order a sample before placing a bulk order?

Provide the preferred model and destination country or postal code to confirm sample availability, pricing and preparation time.

Which accessories are included with each fryer?

Request an itemized packing list for the selected model to confirm the included baskets, lids and other accessories. List additional items separately in the enquiry.

How can I order replacement parts?

Provide the fryer model, a photo of the equipment nameplate and clear photos or part numbers of the required components. These details help identify matching parts and confirm availability.

What packaging information is available for shipping calculations?

Request the packed dimensions, gross weight and package quantity for the selected models. For mixed-model orders, a consolidated packing estimate can be reviewed against the proposed quantities.

Request a Commercial Fryer Quotation

Send VOCOOK the preferred models, quantities and destination market. If a model has not been selected, include the intended foods, batch quantities, installation space and available electrical or gas supply. Add any branding, material or packaging requirements for project review and quotation.

Request a Fryer Quotation

Add to Inquiry List

Get VIP Prices, Contact us Now!

No matteryour project is complicated or simple, nomatter is metal or plastic, you will get anaccurate quotation within 8 hours